JRC JMR-9230-S3 - Page 635

18-33 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Setting Item Description of Setting Setting Value
AUTO
Accepting
S-57 Updated
Chart
Set whether the chart is accepted automatically at completion
of chart import.
Accepted
automatically:
Check
Not accepted
automatically: Not
check
Deletion
Mode(Chart
Maintenance)
Set the operation mode of the Delete button on the status
screen in Chart Maintenance.
Only S-63 Cell Permit: Deletes the license only when the
Delete button is pressed.
S-63 Cell Permit and Chart: Deletes the license and chart
when the Delete button is pressed.
Only S-63 Cell
Permit
S-63 Cell Permit
and Chart
Memo
The setting of Deletion Mode(Chart Maintenance) is valid only under S-63 (ENC that requires the
permit). Under S-57 (ENC that does not require the permit), the chart is also deleted regardless of
this setting.