JRC JMR-9230-S3 - Page 646

Section 18 Setting up the Operation Mode 18-44
Setting Item Description of Setting Setting Value
[Display Color] tab
Outer PPI/Dialog Set up the color outside the PPI.
The label changes depending on the
screen to be called. The label will be Outer
PPI/Dialog for the RADAR screen, and
Dialog for others.
Dark [default]
Black
Inner PPI Set up the color inside the PPI. This item
is displayed only on the RADAR screen.
Blue
Dark Blue
Black [default]
Character Set up the text color. White [default]
Green
RADAR Video Set up the color of radar video.
Displays on the ECDIS screen which has
a PADAR screen and PADAR display
function.
Yellow [default]
Green
Orange
Purple
Dark Red
RADAR Trails(Time) Set up the color of radar trails.
This item is displayed only on the RADAR
screen.
White
Blue
Cyan [default]
Green
Target Symbol Set up the color of the target symbol. White/Black
*1
Cyan
Green [default]
Orange
Range Rings Set up the color of range rings. White/Black
*1
Cyan [default]
Green
Orange
EBL1/VRM1/PI Set up the color of EBL1, VRM1 and
parallel index lines.
White/Gray
*1
Cyan
Green
Orange [default]
EBL2/VRM2 Set up the color of EBL2 and VRM2. White/Gray
*1
[default]
Cyan
Green
Orange
Own
Symbol/HL/Vector
Set up the color of own ship symbol,
heading line and vector.
White/Black
*1
[default]
Cyan
Green
Orange