JRC JMR-9230-S3 - Page 648

Section 18 Setting up the Operation Mode 18-46
Setting Item Description of Setting
Setting Value
Panel
Set the brightness of the operation unit.
Off
Level1(Dark)
[
default of Dusk/Night]
Level2
[
default of Day3]
Level3
[
default of Day2]
Level4(Light)
[
default of Day1]
Display Set the value that is input in the box for the
brightness of the display unit.
0 to 100
*2
*1: Under either of the following conditions in the ECDIS task, Black or Gray can be selected instead of
White.
- ENC is displayed while [Day/Night] is set to Day1 or Day2.
- ARCS is displayed while [Day/Night] is set to Day.
*2: The brightness default values are as follows.
26inch screen(NWZ-208) 19inch screen(NWZ-207) 19inch screen(NWZ-214)
Day1/Day2/Day3: 67
Dusk: 60
Night: 11
Day1/Day2/Day3: 42
Dusk: 20
Night: 4
Day1/Day2/Day3: 70
Dusk: 62
Night: 10
(2) Next botton
It is displayed when the GPS buoy is available.
When you click the second page is displayed, you can set the color of the GPS buoy.
If it is disabled, it will be hidden.