JRC JMR-9230-S3 - Page 661

18-59 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Item saved
Preferences save target Factory setting value, value
and action when Set
Default button is pressed
Location Item
NAVTEX
filter
Display Filtering for
NAVTEX Messages
－Position group
• Station－Display
Filtering
• Station ID
• Month/Year
• Message－Display
Filtering
• Message ID
Filtering Depend on
Position
• Station－Display Filtering:
Off
• Station ID: Remain
• Month/Year: All On
• Message－Display
Filtering: Off
• Message ID: Remain
Filtering Depend on
Position: Off
*1 White/Black interchanges under the following conditions.
In Day1/Day2 (or Day), Black, in Day3/Dusk/Night, White
*2 When the preferences is loaded and the value of the Safety Contour that is less than the MIN
Safety Contour, the value of the MIN Safety Contour is used as the Safety Contour.
Also, the value of the Safety Contour saved for the preferences is not overwrite.
For details about how to set the Own ship's parameters, refer to "19.3.4 Setting own ship's
parameters".