JS-AZ PRIS SCALE - Page 11

9
.
2. If the remote platform is not connected to the scale, when press
LOCAL/REMOTE key, the display will show “E2”.
WEIGHT
UNIT WEIGHT
COUNT
E2
remote
0
Ib kg g
Local Remote HI OK LO ADD
Several seconds later, the display will show:
WEIGHT
UNIT WEIGHT
COUNT
no
remote
Ib kg g
Local Remote HI OK LO ADD
3. seconds later, it will automatically return to normal counting mode.
WEIGHT
UNIT WEIGHT
COUNT
0.0
0
0
Ib kg g
Local Remote HI OK LO ADD
Note:
1) The default platform is Local platform.
2) The default weighting unit of local platform is g, while the remote
platform is kg. And the weighing unit of unit weight is g.
3) You can use local platform to do sample operation, and the
calculated unit weight can be used when changes to remote
platform.
S.W
lack
U.W
lack
Battery
low
Stable Zero NET
S.W
lack
U.W
lack
Battery
low
Stable Zero NET
S.W
lack
U.W
lack
Battery
low
Stable Zero NET