Protection in the transportation
When the initial use, please refer to the following drawing to
take off the protection screw. When the transportation will be
made, please install the protection screw on the machine to
avoid any damage sensitive components.
Leveling the Scale
The scale is equipped with a level indicator on the left bottom side
of the front panel and four adjustable leveling feet. Adjust the
leveling feet until the bubble appears in the center circle of the
indicator.
Turn on Scale
Do not turn on scale with anything on the platform. The switch is
located on the right side of the scale. The scale will start to count
down from nine to zero and will display the max. capacity of the
scale in the WEIGHT display. The scale is then ready for use.
Give a warm-up for 15~30 minutes before use.
To Next Page
Loading...