JS-AZ PRIS SCALE - User Programming Functions; Auto Shut-off Timer; Changing Units of Measure

20
.
VI. User Programming Functions
(I) Auto. shut off time span
1. Turn on the scale & press key 4 times one after another
during counting down (self-checking) to zero to enter into USER
PROGRAMMING FUNCTION MODE.
The displays will indicate as below eventually.
WEIGHT
UNIT WEIGHT
COUNT
0
a.off
82483
Ib kg g
Local Remote HI OK LO ADD
Auto. shut off time Auto shut off Internal count
span previously set
2. Press TARE/P.TARE/MOVE key to revolve the system-preset
time span (2min., 5 min., 8 min., and 0 )
(Default setting: 0)
3. Press CLEAR/EXIT key to determine and return to normal
counting mode or press TOTAL/PRINT/ENTER key for
determination and move to next.
(II) Change unit of measure
1. Keep pressing TOTAL/PRINT/ENTER key in USER
PROGRAMMING FUNCTION MODE and release until the
following displays appear.
WEIGHT
UNIT WEIGHT
COUNT
0
Unit
82483
Ib kg g
Local Remote HI OK LO ADD
Units of measure Unit Internal count
5
．
．．
．
S.W
lack
U.W
lack
Battery
low
Stable Zero NET
S.W
lack
U.W
lack
Battery
low
Stable Zero NET