1
1. Notes for system operations
2. Features
• Before connecting to the main power supply, check that the
power requirements shown on the nameplate of the machine
meet the output of the adaptor.
• Do not place the machine at a place where high temperature
and humidity are expected.
• Do not operate the system with wet hands.
• Keep the machine away from any heat or ignition source.
• Before setting up the machine, make sure that the volume is
set at the minimum for both the mixer and amplier.
• The system features the latest anti-interference digital code
circuit design that is proven to isolate the interference
between the system and the outside world.
• Up to 36MHz of bandwidth with a maximum of 1440 channels
to choose from
• Adjustable squelch level
• Default with 6 groups, up to 22 available
• User-dened groups provided
• Automatic scan
• Provided with antenna booster power
• JTS patent: the latest RF allows the transmission of
not only frequency, but also data such as sensitivity, low cut,
transmission power and key lock to the transmitter.
• With one push of the key, upto four transmitters
can be synchronized.
• RF ''no signal'' alert on LCD display
• AF ''microphone mute'' alert on LCD display
• Transmitter ''low battery'' alert on LCD display
• Antenna and power cascading for improved performance
and convenience.
• Digicode prevents intermodulation
To Next Page
Loading...
Need help?
General
