JTS R-4 - Digital Code Alert Function

55
7. Digital Code Alert Function
When receiver's DigiCode function is OFF, the alert screen will
blink rapidly under these circumstance:
When receiver's DigiCode function is ON, the alert screen will
blink slowly under these circumstance:
2.When microphone's power is OFF.
3.When microphone's battery level is too low.
1.When microphone is under mute mode or microphone's
DigiCode function is OFF.
2.When microphone's power is OFF.
3.When microphone's battery level is too low.
1.When microphone is under mute mode.