JTS R-4 User Manual

40
6-3 Operation // /
6-3-1 Power ON/OFF
(1)Power on
To turn on: push Power ON/OFF once.
To turn off: push and hold Power
ON/OFF until the display
shows ''power off.''
Note: when the button is pushed and
held, ''mute on'' or ''mute off'' will
come out 󺸾rst before ''power off.''
(2)Mute: when the transmitter is in use (the display is
at the main page)
To mute: Short push Power ON/OFF and the display
shows ''mute on.''
When in mute, the power indicator is 󺸿ashing red
and the display shows mute on.
To unmute: Short push Power ON/OFF and the
display shows ''mute off.''
(3)Exit the setting menu
When in setting menu: push Power ON/OFF to
return to the main page.
When in function ''items'': push Power ON/OFF once
to return to the setting menu and again to the main
page.
**The display will show ''battery low'' when the
battery is low. In about 30 minutes, the transmitter
will turn itself off automatically.
6-3-2Menu function settings
Push and hold SET for 2 seconds to enter
the function setting menu.
(1)Push▲or▼to selected the desired item.
Push SET to show the default setting.
(2)When the default is shown, use▲or▼to
change the setting and then push SET to
save the change.
Figure 1
Figure 2
LED
Power
Mute On
Mute Off
Battery
Low

JTS R-4 Specifications

General

Brand	JTS
Model	R-4
Category	Microphone system
Language	English