JTS R-4 - Page 45

41
1.Frequency
(1) Use ▲ or ▼ to move to ''1. Frequency
setting.'' Push SET to enter the setting page.
(2) To adjust the 󺸾rst 3 digits of the frequency, use
▲ or ▼ to adjust in the increment of '' +/- '' 1
MHz. Push SET to adjust the 3 digits on the right.
(3)To adjust the 3 digits on the right: use ▲ or ▼
to adjust in the increment of ''+/-'' 0.025 MHz.
Push SET to save the change and exit.
2.Group / Channel
(1)Use ▲ or ▼ to move to ''2. Group / Channel.''
Push SET to enter the setting page.
(2)Select the desired group with ▲ or ▼. Push SET
to save and to the channel settings.
(3)Select the desired channel with ▲ or ▼. Push
SET to save the change.
Frequency
Group / Channel
Sensitivity
Group / Channel
Group / Channel
Frequency
Group / Channel
Sensitivity
Frequency
Frequency