Matters of Caution at Each of Its Use Stages
Transport
1. When lifting the machine or moving it, take sufficient safety measures so that no
dropping accidents will occur.
2. Keep the following environment when transportation or storage.
Environment requirements
Temperature : -15℃ to 70℃
Humidity : 20％ to 95％RH (No condensation)
Before Operation
1. To prevent bodily accidents, never put in your hand into the driving unit.
Maintenance
1. To prevent accidents due to unaccustomedness, repair and adjustment shall be
conducted by maintenance engineers who are versed in the machine.
In replacing parts, use genuine parts of our company. We will not assume any
responsibility for an accident due to the use of non-genuine parts.
2. To prevent accidents or electric shock due to unaccustomedness, entrust electrical
repair or maintenance work (including wiring work) to persons versed in electricity,
or ask engineers of our company or its sales company to do it.
3. To prevent bodily accidents, confirm after such work as repair, adjustment, or parts
replacement that no screws or nuts are loosened.
Use Environment
1. To ensure safety, use the machine under the following environment:
Environment requirements during operation
Temperature : 10℃ to 35℃
Humidity : 30％ to 80％RH (No condensation)
Altitude : Altitude 1000m or less
2. When you move this machine from a warm place to a cold one, condensation may
occur. To prevent any mechanical lock accident from occurring due to rust of
each part, use the machine after it dries up completely.
CAUTION
III
To Next Page
Loading...
