Stacker timer 3 0.00 to 9.99 0.70 sec.
Motion time of material sweeping bar is set. /
* It is possible to set only when clamp bar stacker option is used. 0.01 sec.
Stacker timer 4 0.00 to 9.99 0.00 sec.
Time to advance timing to release the sewing product by lifting clamp foot is /
set. 0.01 sec.
When clamping a short sewing product, the amount to drop by tare is
adjusted.
* It is possible to set only when clamp bar stacker option is used.
Sewing speed under the high-speed mode 1000 to 3000 2500rpm
Number of revolutions of lockstitch section is set. /
* It is possible to set only when sewing speed setting selection is 100rpm
set to memory switch
Sewing speed under the low-speed mode 1000 to 2500 1500rpm
Number of revolutions of condensation and back tuck sewing sections is set. /
* It is limited by sewing speed under the high-speed mode. 100rpm
* It is possible to set only when sewing speed setting selection is
set to memory switch.
Soft start, 1st stitch 500 to 2500 500rpm
Number of revolutions of first stitch at sewing start is limited. /
100rpm
Soft start, second stitch 500 to 2500 700rpm
Number of revolutions of second stitch at sewing start is limited. /
100rpm
Soft start, third stitch 500 to 2500 1000rpm
Number of revolutions of third stitch at sewing start is limited. /
100rpm
Return speed of clamp foot 3 to 7 7
Return speed of clamp foot i set. /
1
ā 100 ā
Setting range
No. Item / Initial value
Edit unit
......... Item that is not displayed due to other setting start.
To Next Page
Loading...
