JUKI APW-895 - Configuration of the Machine

– 2 –
The APW-895 consists mainly of the following units.
A
Frame and structural components (Frame sewing table, covers, foot switch, etc.)
B
Clamp foot unit and feed mechanism
C
Corner knife unit
D
Binder unit (Binder components and its driving components)
E
Pneumatic control unit (Pneumatic control devices and pipings)
F
Stacker unit (Optional)
G
Sewing machine head
H
Electric control unit (Control panel)
I
Operation panel
J
Power switch
K
Temporary stop switch
With this machine consisting of the aforementioned 11 units, you can do desired welting work simply by setting
materials (garment body, interlining piece, welting patch, etc.) in place and operating the switches on the operation
panel.
In addition, when temporary stop switch
K
is pressed during operation of the device, tthe device stops.
A
H
J
I
G
D
K
E
B
F
C
2. Configuration of the machine