4. Operation panel and related parts
(1)Configuration of IP-310
Symbol Name Description
TOUCH PANEL,LCD display section
Changeover of the data input screen and the sewing
screen can be performed.
Changeover of the data input screen and the information
screen can be performed.
Changeover of the data input screen and the communi-
cation screen can be performed.
Changeover of the data input screen and the mode
changeover screen which performs various detail settings
can be performed.
Media card slot Close the cover for use
Connector for RS-232C communication
Variable resistor for adjusting Contrasr of the screen can be adjusted. Adjust it as you
contrast of colored LCD screen like.
Connector for external input
Media removing lever
(Front)
(Right side)
– 97 –
MODE CHANGEOVER key
INFORMATION key
(Caution) When READY key is pressed first after turning ON the power, origin retrieval of the clamp foot is
performed. At this time, the clamp foot moves. So, be careful.
READY key
COMMUNICATION key
To Next Page
Loading...
