JUKI MS-1261A-DWS User Manual

– 62 –
4-5-6. Checking the version information
<Version information screen>
4-5-7. Adjusting the contrast of the LCD of the operation panel
<Contrast setting screen>
①
Select "06 Version display" by pressing
❺
on the mode screen. Then, press
❼
to
display the version information screen.
A
represents the version of the panel software.
B
represents the version of the main-body software.
②
Press
❽

again to return the current screen
to the sewing screen .
Press
❽
yet again to return the current
screen to the mode screen .
A
B
①
Selecting the contrast setting function
Select "07 Contrast setting" by pressing
❺
on the mode screen. Then, press
❼
to
display the contrast setting screen.
②
Setting the contrast
Set the contrast by pressing
❻

.
Setting range : 0 (bright) to 4 (dark)
If the
❺
is pressed, the entire screen will
be turned white to allow you to check for uneven-
ness of display on the screen.
(When the
❺
is pressed again, the screen
returns to the previous display.)
③
Press
❽

to conrm the data and return the
current screen to the sewing screen .
Press
❽
yet again to return the current
screen to the mode screen .
❺
❺
❼
❼
❽
❽
❻

JUKI MS-1261A-DWS Specifications

General

Brand	JUKI
Model	MS-1261A-DWS
Category	Sewing Machine
Language	English