– 17 –
6
543
1
2
7
C
A
D
A : Number of stitches of normal stitching setting
0 to 15 stitches
B : Number of stitches of reverse stitching setting
0 to 15 stitches
C : Number of stitches of normal stitching setting
0 to 15 stitches
D : Number of times of repetition
0 to 9 times
(Caution) When process D is set to 5 times, the sewing is repeat-
ed as A
/
B
/
C
/
B
/
C.
B
(2) Overlapped stitching pattern
Overlapped stitching pattern can be programmed.
[Setting procedure of the overlapped
stitching]
1) Effective/ineffective of the over-
lapped stitching pattern can be
changed over by pressing
switch
2
.
When the overlapped stitching pat-
tern is rendered effective, LED
D
lights up.
2) Select a process (A, B, C or D) the
number of stitches for which is to be
changed by using switch
4
.
The number which is ashing on and
off represents the process which is
being set.
A
B
C
B
C
D
3) Change the number of stitches for the selected process by using switch
5
and switch
6
.
4) Press switch
3
to conrm the change you have made.
(The sewing machine does not run unless the setting has been conrmed by pressing switch
3
.)
(Caution) The overlapped stitching pattern is carried out under automatic operation mode. Once the
pedal is depressed, the sewing machine will automatically perform sewing of the number of
overlapped stitches.
To Next Page
Loading...
Need help?
General
