Julabo MV-4 - Preparations

MV / MW
7
5. Preparations
5.1. Installation
!
Heating circulators
 Place the circulator in an upright position.
Bridge mounted circulator
 Place the bath tank in an upright position.
 Adjust the bridge to width of the bath tank and
place it on the bath tank.
Bridge is extendable from 310 mm to 660 mm.
5.2. Bath liquids and tubing

Operation with flammable bath liquids permitted.
 Recommended bath liquids:
Bath liquids Temperature range Flash point fire point
Thermal M +50 °C ... 170 °C >275 °C >320 °C
Thermal H +50 °C ... 250 °C >280 °C >350 °C
deionized water 5 °C bis 80 °C
ATTENTION: The maximum permissible viscosity is 30 mm
2
x s
-1.
No liability for use of other bath liquids!
Order No. Bath liquid
8 940 100
8 940 101
8 940 102
8 940 103
Thermal M
Thermal M
Thermal H
Thermal H
10 liters container
5 liters container
10 liters container
5 liters container