51
3 Operation and visualisation
3.6 Colour assignment
With the aid of the setup program you can select the colours which are used
for print-outs.
Selections can be made for:
- Measurement traces
- Event traces
- Instrument name
- External text
- Binary-linked external text
- Even texts, event counters
Texts which are associated with a channel (e.g. scaling, channel
number, limit comparator texts) are printed in the same colour as
the channel concerned. This also applies to the statistical report.
The colours are fixed for:
- Start and end text always red
- “Power on” / “Power off” text always red
- Time print alternating
1
- Print change of feed/speed alternating
1
1. The colour changes for each print-out. This ensures an even consump-
tion of the coloured inks.
To Next Page