95
10 Extra codes and accessories
10.4 Setup program
The setup program provides convenient configuration of the recorder, using an
IBM-compatible PC.
In addition, the following functions are available for operating and program-
ming the printing recorder:
- setting different print colours
- print mode and priorities
- determining which parameters can be set on the printing recorder
- settings can be printed out, using the setup program
- various setup settings can be managed, and transferred to the printing
recorder as required
- carry out an instrument test
Hardware
requirements
- IBM-PC or compatible computer
- CPU from Intel 386
-4 MB RAM
- 3.5" diskette drive
- hard disk with at least 6 MB free space
- one free RS232 serial interface
-mouse
-VGA graphics
Software
requirements
-Microsoft Windows
1
3.1/3.11/95/NT 4.0
1. Microsoft and Windows are registered trademarks of the
Microsoft Corporation
To Next Page
Loading...