53
4 Configuration table
4.1 Operating examples
Example 1 The date, time and weekday are to be programmed.
l
Key Display Description
5 AMB. TEMP. +35.08°C Recorder is in basic status
h + R Call up operating level
S-LEVEL (now in operating level)
h + R Start code check
CODE: 9200 Enter 9200, by using the l, r, h, R
keys
E Conclude entry of code number
P-LEVEL (now in parameter level)
h Call 1st. parameter of the parameter
level
LANGUAGE
h Call next parameter
DATE & TIME
E Call parameter to be changed
DATE: 03.11.98 Alter date, by using the l, r, h, R
keys
E Confirm date
DAY: MONDAY Alter weekday, using the h, R keys
E Confirm weekday
TIME: 12:00 Change time, using the l, r, h, R
keys
E Confirm time
DATE & TIME Parameter entry is finished
e Leave parameter level
INITIALISATION As long as the display is flashing,
the recorder is being initialised
with the new data
S-LEVEL Recorder is in the operating level again
To Next Page
Loading...