Juniper AP43 - Page 14

Table 3: Specicaons for AP43 (Connued)
Parameter Descripon
External antennas (for
AP43E)
The AP43 with external antennas is cered up to an allowed antenna gain value.
An antenna is not supported if its gain exceeds the values listed below:
• Omnidireconal antennas
• 2.4-GHz antenna—4 dBi peak gain
• 5-GHz antenna—6 dBi peak gain
• Direconal antennas
• 2.4-GHz antenna—8 dBi peak gain
• 5-GHz antenna—10 dBi peak gain
Power opons 802.3at (PoE+)
802.3bt (PoE)
12V/3A DC power supply
Powering adaptor 100–240VAC, 50–60 Hz, input
12V/3A DC output (all regions)
Radio frequency (RF)
• 5-GHz radio—4x4:4 spaal streams 802.11ax MU-MIMO and SU-MIMO
• 2.4-GHz or 5-GHz radio—4x4:4 spaal streams 802.11ax MU-MIMO and SU-
MIMO
• 2.4-GHz or 5-GHz scanning radio
• 2.4-GHz BLE with dynamic antenna array
Bluetooth 5.0 vBLE 16-element direconal antenna array and an omnidireconal Bluetooth
antenna
9