Juniper AP43 User Manual

Table 4: Mounng Brackets for AP43
Part Number Descripon
APBR-U Universal bracket for t-bar and drywall mounng
APBR-T58 Bracket for mounng the AP on a 5/8-in. threaded rod
APBR-M16 Bracket for mounng the AP on a 16-mm threaded rod
APBR-ADP-CR9 Bracket adapter for mounng the AP on a recessed
9/16-in. t-bar or channel rail
APBR-ADP-RT15 Bracket adapter for mounng the AP on a recessed
15/16-in. t-bar
APBR-ADP-WS15 Bracket adapter for mounng the AP on a recessed
1.5-in. t-bar
NOTE: Juniper Access Points ship with the universal bracket APBR-U. If you need other brackets,
you must order them separately.
Universal Mounng Bracket (APBR-U) for Juniper Access Points
You use the universal mounng bracket APBR-U for all types of mounng opons—for example, on a
wall, a ceiling, or a juncon box. Figure 4 on page 14 shows the APBR-U. You'll need to use the
numbered holes to insert screws when mounng the AP on a juncon box. The numbered holes that
you use vary based on the type of juncon box.
13

Juniper AP43 Specifications

General

Brand	Juniper
Model	AP43
Category	Wireless Access Point
Language	English