Juniper AP43 - Table of Contents

Table of Contents
About This Guide | v
1
Overview
AP43 Access Point Overview | 2
AP43 Components | 4
2
Requirements and Specicaons
Specicaons for AP43 | 8
Power Requirements for AP43 | 10
3
Installaon
Mount the AP43 Access Point | 12
Supported Mounng Brackets for AP43 | 12
Universal Mounng Bracket (APBR-U) for Juniper Access Points | 13
Mount an Access Point on a Single-Gang or 3.5-Inch or 4-Inch Round Juncon Box | 15
Mount an Access Point on a Double-Gang Juncon Box | 17
Mount an Access Point on an EU Juncon Box | 18
Mount an Access Point on a US 4-Inch Square Juncon Box | 20
Mount an Access Point on a 9/16-Inch or 15/16-Inch T-Bar | 21
Mount an Access Point on a Recessed 15/16-Inch T-Bar | 22
Mount an Access Point on a Recessed 9/16-Inch T-Bar or Channel Rail | 24
Mount an Access Point on a 1.5-Inch T-Bar | 26
Mount an AP21 or a BT11 on a 5/8-Inch Threaded Rod | 27
Mount an AP21 or BT11 on a 16-mm Threaded Rod | 29
Mount an Access Point on a 1/2-Inch Threaded Rod | 31
Connect an AP43 to the Network and Power It On | 34
iii