Juniper AP43 - Mount an Access Point on a Recessed 9;16-Inch T-Bar or Channel Rail

Figure 18: Aach the AP to a Recessed 15/16-Inch T-Bar
Mount an Access Point on a Recessed 9/16-Inch T-Bar or Channel Rail
To mount an access point (AP) on a recessed 9/16-in. ceiling T-bar, you'll need to use the ADPR-ADP-
CR9 adapter along with the mounng bracket (APBR-U).
1. Aach the ADPR-ADP-CR9 adapter to the T-bar or channel rail.
Figure 19: Aach the ADPR-ADP-CR9 Adapter to a Recessed 9/16-Inch T-Bar
24