Juniper AP43 - Mount an Access Point on an EU Junction Box

Figure 8: Mount the AP on the Double-Gang Juncon Box
Video: Mounng an AP on a US Double-Gang Juncon Box
Mount an Access Point on an EU Juncon Box
You can mount an access point (AP) on an EU juncon box by using the universal mounng bracket
(APBR-U) that ships with the AP. To mount an AP on an EU juncon box:
1. Aach the mounng bracket to the EU juncon box by using two screws. Ensure that you insert the
screws in the holes marked 4 as shown in Figure 9 on page 19.
18