Juniper AP43 - Mount an Access Point on a 1;2-Inch Threaded Rod

Figure 31: Mount the AP21 or BT11 on a 16-mm Threaded Rod
Mount an Access Point on a 1/2-Inch Threaded Rod
To mount an access point (AP) on a 1/2-in. threaded rod, you'll need to use the APBR-ADP-T12 bracket
adapter and the universal mounng bracket APBR-U.
1. Aach the APBR-ADP-T12 bracket adapter to the APBR-U mounng bracket. Rotate the bracket
unl you hear a disnct click, which indicates that the bracket is locked in place.
31