Juniper AP43 User Manual

Figure 24: Aach the APBR-U Mounng Bracket to the ADPR-ADP-WS15 Adapter
3. Posion the AP such that the keyholes of the mounng bracket engage with the shoulder screws on
the AP. Slide and lock the AP in place.
Figure 25: Aach the AP to a 1.5-Inch T-Bar
Mount an AP21 or a BT11 on a 5/8-Inch Threaded Rod
To mount an AP21 or a BT11 on a 5/8-in. threaded rod, you'll need to use the APBR-T58 bracket. that
you'll need to order separately.
1. Aach the APBR-T58 bracket to the threaded rod by using the lock washer and nut provided.
27

Juniper AP43 Specifications

General

Brand	Juniper
Model	AP43
Category	Wireless Access Point
Language	English