Juniper CTP Series - Page 5

If You Detect or Suspect Damage | 57
Contacting Juniper Networks | 57
Installing the Chassis | 59
Before You Install the CTP150 Platform | 59
Installing the CTP150 Platform in Freestanding Mode | 60
Installing the CTP150 Platform in a Rack | 60
Installing Modules | 63
CTP150 Modules Slot and Port Numbering | 63
Protecting CTP150 Modules and Slots | 64
Required Tools and Safety Items for Installing CTP150 Modules | 64
Installing a CTP Interface Module, Processor Module, or Clock Module | 65
Removing a CTP Interface Module, Processor Module, or Clock Module | 66
Installing or Removing a CTP150 CompactFlash Card | 67
Cabling | 69
Cabling the CTP150 Platform Overview | 69
Required Tools, Wires, and Cables for the CTP150 Platform | 70
Cabling a CTP150 Interface Module | 71
CTP150 Fast Ethernet Cables | 71
Configuration
5
Accessing the CTP150 Platform | 75
Setting Up Management Access to the CTP150 Platform | 75
Connecting Directly to the CTP150 Platform | 75
Using HyperTerminal to Access the CTP150 Device | 76
Using SSH to Access the CTP Platform | 77
Powering On and Initially Configuring the CTP150 Device | 79
Before You Power On the CTP150 Device | 79
Powering On and Initially Configuring the CTP150 Device | 80
Powering On the CTP150 Device | 80
Configuring the First Boot Script for the CTP150 Device | 81
Powering Off the CTP Platform | 83
v