Juniper CTP2000 Series - Chapter 18 Maintaining Components; Required Tools for Maintaining the CTP Platform; Storing CTP Modules and Other Components

CHAPTER 18
Maintaining Components
•
Required Tools for Maintaining the CTP Platform on page 117
•
Storing CTP Modules and Other Components on page 117
•
Cleaning the CTP Platform on page 118
•
Replacing an AC Power Supply on page 118
Required Tools for Maintaining the CTP Platform
You need the following tools and other items to replace platform components:
•
Flathead and Phillips screwdrivers
•
Insulated adjustable wrench
•
Antistatic wrist strap
•
Antistatic bags (or other protective packaging to hold components)
•
Plastic boots or other protective covers for fiber-optic connectors
Related
Documentation
Storing CTP Modules and Other Components on page 117•
• Cleaning the CTP Platform on page 118
Storing CTP Modules and Other Components
Retain the packaging in which a module or other component was shipped, and use this
packaging to store the item. Modules are shipped in antistatic bags and protective
packaging. Components, such as transceivers and CompactFlash cards, are shipped in
antistatic plastic containers within an antistatic padded box.
CAUTION: Failure to store electronic modules and components correctly can
lead to damage of these items.
Follow these guidelines for storing modules and other components:
117Copyright © 2017, Juniper Networks, Inc.