CHAPTER 10
Unpacking and Inspecting the CTP
Platform
•
Before You Unpack the CTP Platform on page 79
•
Unpacking the CTP Device on page 79
•
Inspecting Platform Components and Accessories on page 80
•
If You Detect or Suspect Damage on page 80
•
Contacting Juniper Networks on page 81
Before You Unpack the CTP Platform
Before you begin unpacking the device, be sure you have the following tools:
•
No. 2 Phillips screwdriver
•
Utility knife
•
Mechanical lift, or at least two people to assist in lifting
Related
Documentation
Unpacking the CTP Device on page 79•
• Inspecting Platform Components and Accessories on page 80
• If You Detect or Suspect Damage on page 80
• Contacting Juniper Networks on page 81
Unpacking the CTP Device
Depending on the device, it may be delivered boxed, bolted, and strapped to a skid. For
your convenience, we recommend that you unpack the device in the location where you
want to install it.
WARNING: For the larger CTP series devices, three people are required to
install the device in a rack: two to lift the device into position and one to screw
it to the rack.
79Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
