CHAPTER 23
Troubleshooting Power Failures
•
CTP Platform Does Not Power On on page 131
•
CTP Platform Shuts Down on page 131
CTP Platform Does Not Power On
Problem Description:
Symptoms:
• Device is not receiving power.
• Module's power supply has malfunctioned.
• Power source cannot handle system load.
Solution Verify that all power connections are correct.1.
2. Verify that the power supply is delivering the correct voltage, current, and wattage to
the device. See the system specifications for your particular CTP platform.
3. If the platform still does not operate, contact the Juniper Networks Technical
Assistance Center (JTAC).
Related
Documentation
CTP Platform Shuts Down on page 131•
CTP Platform Shuts Down
Problem Description:
Symptoms:
• Temperature is too high.
• Power is lost.
Solution 1. Verify that power connections are properly attached.
2. Verify that device is receiving power.
131Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
