EasyManuals Logo

Juniper EX4200-24T Complete Hardware Guide

Juniper EX4200-24T
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #237 background imageLoading...
Page #237 background image
CHAPTER 18
Radiation and Laser Warnings
•
Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 213
•
Radiation from Open Port Apertures Warning for EX Series Switches on page 216
Laser and LED Safety Guidelines and Warnings for EX Series Switches
EX Series switches are equipped with laser transmitters, which are considered a Class 1
Laser Product by the U.S. Food and Drug Administration and are evaluated as a Class 1
Laser Product per EN 60825–1 requirements.
Observe the following guidelines and warnings:
•
General Laser Safety Guidelines on page 213
•
Class 1 Laser Product Warning on page 213
•
Class 1 LED Product Warning on page 214
•
Laser Beam Warning on page 214
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laserradiation. The lens
in the human eye focuses all the laser power on the retina, so focusing the eye directly
on a laser source—even a low-power laser—could permanently damage the eye.
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
213Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Other manuals for Juniper EX4200-24T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX4200-24T and is the answer not in the manual?

Juniper EX4200-24T Specifications

General IconGeneral
BrandJuniper
ModelEX4200-24T
CategorySwitch
LanguageEnglish

Related product manuals