Juniper EX4200-24T - Table 22: SFP+ Direct Attach Cable Specifications

Table 22: SFP+ Direct Attach Cable Specifications
SpecificationModel
10 Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-1m
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in.Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
1 m (3.3 ft)Length
10 Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-3m
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
30 AWGWire AWG
1 in.Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
3 m (9.9 ft)Length
71Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Component Specifications