Juniper Junos OS - Page 108

from {
interface [interface-name];
routing-instance [routing-instance-name];
zone [zone-name];
}
rule rule-name {
description text;
match {
application {
[application];
any;
}
(destination-address <ip-address> | destination-address-name
<address-name>);
destination-port (port-or-low <to high>);
protocol [protocol-name-or-number];
source-address [ip-address];
source-address-name [address-name];
source-port (port-or-low <to high>);
}
then source-nat;
interface {
persistent-nat {
address-mapping;
inactivity-timeout seconds;
max-session-number value;
permit (any-remote-host | target-host | target-host-port);
}
off;
pool <pool-name>
persistent-nat
address-mapping;
inactivity-timeout seconds;
max-session-number number;
permit (any-remote-host | target-host | target-host-port);
}
rule-session-count-alarm (clear-threshold value | raise-threshold value);
}
}
to {
interface [interface-name];
routing-instance [routing-instance-name];
zone [zone-name];
}
}
}
static rule-set rule-set-name;
description text;
from {
interface [interface-name];
routing-instance [routing-instance-name];
zone [zone-name];
}
rule rule-name {
description text;
match {
Copyright © 2016, Juniper Networks, Inc.92
Getting Started Guide for Branch SRX Series