Initial direction: 9072 272 bps
Reply direction : 9072 272 bps
Input packets : 216 6 pps
Initial direction: 108 3 bps
Reply direction : 108 3 bps
Output packets : 216 6 pps
Initial direction: 108 3 bps
Reply direction : 108 3 bps
Session rate : 108 3 sps
Active sessions : 93
Session deletions : 15
Policy lookups : 108
Policy: p2, action-type: permit, services-offload:enabled , State: enabled, Index:
5, Scope Policy: 0
Policy Type: Configured
Description: The policy p2 is for the sales team
Sequence number: 1
From zone: untrust, To zone: trust
Source addresses:
any-ipv4(global): 0.0.0.0/0
any-ipv6(global): ::/0
Destination addresses:
any-ipv4(global): 0.0.0.0/0
any-ipv6(global): ::/0
Source identities:
role1
role2
role4
Application: any
IP protocol: 0, ALG: 0, Inactivity timeout: 0
Source port range: [0-0]
Destination port range: [0-0]
Per policy TCP Options: SYN check: No, SEQ check: No
show security policies detail (TCP Options)
user@host> show security policies policy-name policy1 detail
node0:
--------------------------------------------------------------------------
Policy: policy1, action-type: permit, State: enabled, Index: 7, Scope Policy: 0
Policy Type: Configured
Sequence number: 2
From zone: trust, To zone: untrust
Source addresses:
any-ipv4(global): 0.0.0.0/0
any-ipv6(global): ::/0
Destination addresses:
any-ipv4(global): 0.0.0.0/0
any-ipv6(global): ::/0
Application: any
IP protocol: 0, ALG: 0, Inactivity timeout: 0
Source port range: [0-0]
Destination port range: [0-0]
Per policy TCP Options: SYN check: No, SEQ check: No
Per policy TCP MSS: initial: 800, reverse: 900
show security policies policy-name p1 (Negated Address)
user@host>show security policies policy-name p1
node0:
--------------------------------------------------------------------------
Copyright © 2016, Juniper Networks, Inc.126
Getting Started Guide for Branch SRX Series
To Next Page
Loading...
Need help?
General
