12 Mesa Rugged Notepad Owner’s Manual
Perform Set Up
1. The Mesa powers on and begins the startup process. A
progress indicator is shown on the screen.
2. Follow the on-screen instructions.
3. The Clock and Alarms control panel is shown. Adjust the
time zone, date and time if necessary and tap OK.
4. Tap on the screen again to complete the set up process.
5. The Home screen appears.
6. Charge the baery pack(s) at room temperature (68° F or
20° C) for 2 to 3 hours if you are using one pack and 4 to 6
hours if you are using 2 packs.
To Next Page
Loading...
