8. Use a 13/32 in. (10 mm) open-end wrench or socket wrench to remove the four sets of bracket bolts
that secure the chassis to the shipping pallet (see Figure 49 on page 134).
Figure 49: Bracket Bolt Removal
9. Unpack the accessory box and lay out the contents so that they are ready for use.
10. Verify that your order includes all appropriate parts. See “MX10008 Components and Configurations”
on page 31 for information about base configurations and redundant configurations and “Comparing
the MX10008 Order to the Pack” on page 136.
11. Store the brackets and bolts inside the accessory box.
12. Save the shipping box and packing materials in case you need to move or ship the router at a later time.
SEE ALSO
MX10008 Components and Configurations | 31
Unpacking Line Cards, RCBs, and Switch Fabric Boards | 135
134
To Next Page
Loading...
