Figure 109: Installing a JNP10K-PWR-AC2 in an MX10016
11. Attach each power cable to a dedicated power (A and B). The JNP10K-PWR-AC2 only requires that
each power supply be connected to a separate source. See Figure 110 on page 213 for some possible
cabling combinations for MX10008 and Figure 111 on page 214 for MX10016.
Figure 110: Proper Load Balancing for JNP10K-PWR-AC2 Power Cables on MX10008
213
To Next Page
Loading...
