Juniper MX204 - Page 7

Table 1: Rack Requirements and Specicaons for an MX204 Router
Rack Requirement Guidelines
Rack type and mounng bracket
hole spacing
Use a four-post rack. You can mount the router on any four-post rack that
provides bracket holes or hole paerns spaced at 1 U (1.75-in./4.44-cm)
increments and that meets the size and strength requirements specied in
this table.
A U is the standard rack unit dened in Cabinets, Racks, Panels, and
Associated Equipment (document number EIA-310–D) published by the
Electronics Components Industry Associaon (hp://www.ecianow.org/).
4