Juniper PTX10008 - Page 169

JNP10K-PWR-AC Power Specifications
PTX10008 and PTX10016 redundant configuration router can use either AC or DC power supplies; base
configuration routers are AC only.
Table 58 on page 171 lists the power specifications for the AC power supply (JNP10K-PWR-AC) used in a
PTX10000 chassis.
Table 58: Power Specifications for a JNP10K-PWR-AC Power Supply
SpecificationsItem
Operating range: 200–240 VACAC input voltage
50–60 HzAC input line frequency
16 AAC input current rating
2700 WAC output power
Table 59 on page 171 shows the physical specifications for an AC power supply.
Table 59: Physical Specifications for a JNP10K-PWR-AC Power Supply
ValueSpecification
3.5 in. (8.89 cm)Height
3.6 in. (9.14 cm)Width
14.4 in. (36.58 cm)Depth
6.8 lb (3.08 kg)Weight
JNP10K-PWR-AC2 Power Specifications
PTX10008 and PTX10016 redundant configuration router can use either AC or DC power supplies; base
configuration routers are AC only. The JNP10K-PWR-AC2 power supply supports AC, HVAC, and HVDC.
Table 60 on page 172 lists the power specifications for the AC power supply (JNP10K-PWR-AC) used in a
PTX10000 chassis.
171