Table 60: Power Specifications for a JNP10K-PWR-AC2 Power Supply
SpecificationsItem
180–305 VACAC input voltage
190–410 VDCDC input voltage
28.5 AInput current rating
12.3 V, 5500 W with dual feed and 5000 W with single feedDC output power
Table 61 on page 172 shows the physical specifications for a JNP10K-PWR-AC2 power supply.
Table 61: Physical Specifications for a JNP10K-PWR-AC2 Power Supply
ValueSpecification
3.5 in. (8.89 cm)Height
3.6 in. (9.14 cm)Width
15.1 in. (38.35 cm)Depth
12.2 lb (5.53 kg)Weight
PTX10000 Power Cables Specifications
IN THIS SECTION
JNP10K-PWR-AC Power Cable Specifications | 173
JNP10K-PWR-AC2 Power Cable Specifications | 175
JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input | 178
Each AC power supply has two independent 16 A rated AC inlets on the faceplate. Most sites distribute
power through a main conduit that leads to frame-mounted power distribution panels, one of which can
be located at the top of the rack that houses the router. An AC power cord connects each power supply
to the power distribution panel.
172
To Next Page
Loading...
