•
ESD grounding strap.
•
Electrostatic bag, one for each component.
•
If you are returning the chassis:
•
A 13/32-in. or 10-mm open-end or socket wrench to install the bracket bolts on the chassis and
shipping pallet
•
An appropriate screwdriver for the mounting screws used on your rack.
This topic covers:
Packing a PTX10000 Chassis for Shipping
The PTX10000 is shipped in a cardboard box that has a two-layer wooden pallet base with foam cushioning
between the layers. The router chassis is bolted to the pallet base with four pallet fasteners, two on each
side of the chassis. See Figure 233 on page 389 for the stacking configuration of the PTX10008 and
Figure 234 on page 390 for the PTX10016.
Figure 233: Stacking Configuration for Packing the PTX10008 Chassis
389
To Next Page
Loading...
