Juniper SSR130 Hardware Guide

•
Zero Trust Security (ZTS)—The SSR130 ensures ZTS by authenticating all routes and encrypting all
session traffic. Applications, devices, or users cannot initiate any session that does not comply with the
authentication policies and access rules. The SSR130 supports session Layer 2 through Layer 5 stateful
firewall functions, including DoS/DDoS protection, NAT, encryption, VPN, and traffic filtering.
•
Adaptive encryption—The SSR130 automatically detects traffic encrypted using HTTPs or IPSec and
does not reencrypt such traffic. This capability results in improved performance and reduced overhead
due to double encryption.
•
Multipath routing and failsafe service delivery—Application and policy-based multipath routing, intelligent
path monitoring, and application delivery capabilities with no loss ensure that application traffic is
optimized across multiple paths and delivered despite failures.
•
Wireless WAN support—In addition to Ethernet connections, Wireless WAN support through the LTE
module provides more flexibility in deployments.
SSR130 Models
The SSR130 is available in three different models, with or without LTE support.
NOTE: To use the SSR130 appliance, you must purchase the SSR software subscription license
sold separately.
Table 1: SSR130 Models
SSR130-AASSR130-AESSR130
16 GB16 GB16 GBRAM
120 GB SSD120 GB SSD120 GB SSDStorage
DesktopDesktopDesktopForm factor
Six 1-Gigabit Ethernet ports
Two 1-Gigabit Ethernet
RJ-45/SFP combo ports
One USB 3.0 port
One RJ-45 Console port
Six 1-Gigabit Ethernet ports
Two 1-Gigabit Ethernet
RJ-45/SFP combo ports
One USB 3.0 port
One RJ-45 Console port
Six 1-Gigabit Ethernet ports
Two 1-Gigabit Ethernet
RJ-45/SFP combo ports
One USB 3.0 port
One RJ-45 Console port
Ports
9

Juniper SSR130 Specifications

General

Brand	Juniper
Model	SSR130
Category	Network Hardware
Language	English