Juniper SSR130 - Site Planning, Preparation, and Specifications

88 pages

To Next Page

To Previous Page

CHAPTER

Site Planning, Preparation, and

Specifications

Site Preparation Checklist for SSR130 | 19

SSR130 Site Guidelines and Requirements | 20

Cable Specifications and Pinouts for SSR130 | 25

Main Page

Table of Contents3
Overview7
SSR130 Appliance Overview8
Overview8
Benefits of SSR1308
SSR130 Models9
SSR130 Chassis10
Front Panel of an SSR13010
Rear Panel of an SSR13012
Chassis Status Leds12
Network Port Leds13
SSR130 Power System14
Cooling System14
LTE Support on SSR13015
Overview15
Antennas16
Firmware Upgrade Support17
Site Planning, Preparation, and Specifications18
Site Preparation Checklist for SSR13019
SSR130 Site Guidelines and Requirements20
General Site Installation Guidelines21
Site Electrical Wiring Guidelines21
Chassis Physical Specifications for SSR13022
Environmental Requirements and Specifications for SSR13022
Clearance Requirements for Hardware Maintenance of SSR13023
Requirements for Mounting an SSR130 Appliance on a Desktop or Other Level Surface24
Rack Requirements for SSR13024
Cable Specifications and Pinouts for SSR13025
Console Port Connector Pinouts for SSR13026
Pluggable Transceivers Supported on SSR13026
Initial Installation and Configuration27
Unpack and Mount an SSR13028
Unpack an SSR13028
Verify Parts Received with the SSR13029
Register Products-Mandatory to Validate Slas30
Mount an SSR130 on a Desk or Other Level Surface30
Mount an SSR130 on a Two-Post Rack31
Installing Antennas for the SSR130 Appliances that Support LTE33
Inserting the SIM Card34
Connect the SSR130 to Power35
Connect Earth Ground to SSR13035
Connect Power to SSR13037
Power off the SSR13038
Connect SSR130 to External Devices39
Connect SSR130 to a Management Console39
Configuring SSR Software on the SSR13040
Configure the SSR130 Appliance from the SSR Conductor41
Quickstart from the OTP ISO44
Contacting Customer Support and Returning the Chassis or Components | 5150
Contacting Customer Support and Returning the Chassis or Components51
How to Return a Hardware Component to Juniper Networks, Inc51
Locating the Chassis Serial Number52
Contact Customer Support to Obtain Return Material Authorization52
Guidelines for Packing Hardware Components for Shipment53
Safety and Compliance Information54
Definitions of Safety Warning Levels56
General Safety Guidelines and Warnings59
Restricted Access Warning61
Qualified Personnel Warning64
Prevention of Electrostatic Discharge Damage64
Fire Safety Requirements66
Fire Suppression66
Fire Suppression Equipment66
Laser and LED Safety Guidelines and Warnings67
General Laser Safety Guidelines68
Class 1M Laser Product Warning69
Class 1M Laser Radiation Warning69
Class 1 Laser Product Warning70
Class 1 LED Product Warning71
Laser Beam Warning72
Unterminated Fiber-Optic Cable Warning73
Chassis and Component Lifting Guidelines75
Radiation from Open Port Apertures Warning76
Maintenance and Operational Safety Guidelines and Warnings77
Battery Handling Warning78
Jewelry Removal Warning79
Lightning Activity Warning81
Operating Temperature Warning82
Product Disposal Warning84
Action to Take after an Electrical Accident85
General Electrical Safety Guidelines and Warnings85
AC Power Electrical Safety Guidelines86
SSR130 Agency Approvals87
FCC Declarations88

Juniper SSR130 - Site Planning, Preparation, and Specifications

Table of Contents

Other manuals for Juniper SSR130

Related product manuals