Jura E80 - 1 Preparing and Using for the First Time; JURA on the Internet; Setting up the Machine; Filling the Bean Container

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your E8 and on every aspect of coffee.
When setting up your E8, please note the following:
U
Place the E8 on a horizontal surface that is not sensitive
to water.
U
Choose a spot for your E8 which protects the machine
against overheating. Ensure that the ventilation slots are
not covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur
®
test strips supplied with the
machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
Determining the water
hardness