Jura E80 - Adjusting the Grinder; Hot Water

20
2 Preparation
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is
running.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind dur-
ing the preparation of an espresso.
Precondition:The start screen (‘1/3’) is displayed.
T Place a cup under the coffee spout.
T Open the cover of the grinder adjustment switch.
T Press the ‘Espresso’ button to start preparation.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
T Close the cover of the grinder adjustment switch.
The E8 allows you to prepare different variants of hot water: ‘Hot
water’ and ‘Hot water for green tea’.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Example:Proceed as follows to prepare hot water for green tea.
Precondition:The start screen (‘3/3’) is displayed.
T Place a cup under the fine foam frother.
T Press the ‘Hot water for green tea’ button.
‘Hot water for green tea’, the preset amount of water flows
into the cup.
Preparation stops automatically. Your E8 is once more ready
for use.
Adjusting the grinder
NOTICE
Hot water
J
CAUTION