Jura E80 - Dismantling and Rinsing the Professional Fine Foam Frother

31
5 Maintenance
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Remove the professional fine foam frother.
T Dismantle the professional fine foam frother into its
individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250ml) cold water and 1 capful of
JURA milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation of the professional
fine foam frother.
T Re-fit the professional fine foam frother on the milk system.
Dismantling and rinsing
the professional fine
foam frother
1
2