Jura E80 - Automatic Switch-Off

25
4 Permanent settings in programming mode
Example:Proceed as follows to change the coffee strength for one
coffee.
T Press the ‘Pc’ button.
T Press the ‘>’ button several times until ‘3/5’ is displayed.
T Press the ‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the ‘>’ button (bottom right).
T Press the ‘Coffee’ button.
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee’ appears and the coffee strength is displayed.
T Press the ‘<’ or ‘>’ button to change the setting for the cof-
fee strength.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘’ button for around 2 seconds to exit program-
ming mode.
By instructing your E8 to automatically switch itself off, you can cut
down your energy consumption. If this function is activated, your E8
switches off automatically after the preset time following the last
action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
T Press the ‘Pc’ button.
T Press the ‘>’ button several times until ‘4/5’ is displayed.
T Press the ‘Switch off after’ button.
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the switch-off time.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/5’
T Press the ‘’ button to exit programming mode.
Automatic switch-off