Jura GIGA6 - Connecting Milk System

14
1 Preparing and using for the first time
T Place a receptacle under the dual spout.
‘Machine is heating’
‘Machine is rinsing’
, ‘Milk system is being rinsed’. The rinse
stops automatically. The start screen is displayed. Your GIGA
is ready for use.
Your GIGA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a milk container.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
Your GIGA is equipped with the JURA Smart Connect. This allows you
to connect the machine wirelessly to a compatible JURA accessory
(e.g. the Cool Control milk cooler).
E The Smart Connect can be protected against unauthorised
access using a PIN. Activate the PIN function via the JURA app.
You will find more information at
www.jura.com/smartconnect.
E Please note that you can only connect either the Cool Control
or the J.O.E.
®
app from JURA to the coffee machine via Smart
Connect and not both at the same time.
Precondition:The start screen is displayed.
T Touch
‘P’.
‘Machine settings’
T Touch ‘Machine settings’ f.
‘Switch off after’
Connecting milk
Connect accessory (with
wireless connection)